• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

Door handles are a key part of your home's decor. A new handle will elevate your space and bring your decor up-to-date.

Over time the knobs on your door could become stiff, or even break. These are indications that it's time to replace the knobs. This guide will help you select the correct door handle replacement for your home.

Door Knobs

The handles on your doors will improve the look of your home and allow you to open and shut them. They come in a variety of finishes, colors and styles to match your decor. If yours is beginning to show signs of wear or you just want to upgrade, replacing them is relatively easy and can be accomplished in a few steps.

The first thing you need to find is the shaft or spindle through the knob's attachment to the door. Some have a tiny hole that you can insert an incredibly small screwdriver to remove the set screws holding the handle in place. Some have a small slot or hole where you can use a flathead screwdriver to push on a spring-activated pin called a detent. This pin releases the latch mechanism and lets you pull or Door Handle Repair Plate push the knob.

Once you have the spindle, or shaft, in your hand, remove the old knob and replace it. Make sure it is aligned correctly and ensure that the latch is working properly before tightening the new set screws.

After replacing the knob, place the rod for latching over the hole in the door and then lock it using the rod mechanism on the second knob. Make sure the holes are aligned, then tighten the screws on the latch plate.

Some homeowners opt for an brushed or smooth metal finish for their door hardware, giving their home a sleek and contemporary appearance. It will complement their furniture. Others prefer a more rustic design, which pairs well with farmhouse-styled spaces. If you have one of your family members with mobility issues, you may want to choose the lever or rim lock that require less pressure to operate.

Other aspects are being considered more and more for the design of double glazing door handle repairs handles. Infection control and accessibility have been key issues in the creation of new handle designs. For instance some handles handle designs can be operated by the arm of a person.

Latch

The latch that holds your door handle open can wear out from age and use. The replacement of the latch to accommodate an entirely new handle can be an easy DIY task and it can make a big change in the way your door opens and closes.

Depending on the kind of handle you have depending on the type of handle you have, the latch may be a part of the knob or it could be an individual piece attached to the door. In either case, you'll need to follow the same procedure to remove and replace. Getting the old latch out of place is fairly easy especially if the upvc door handle repairs near me handle has what's known as a "magic button". The tiny pressure-slot, which is located on the side knob, is what you need to press in order to pop the latch out of the handle.

If your handle does not have this magical button, the first step is to remove any cover plates that are positioned over the latch plate. These are usually rectangular or circular and can be removed with a screwdriver. Some have a tiny slot in them where you can insert your screwdriver into, while others simply snap off.

Then, unscrew the machine screws that hold the inner plate and latch to the door handle. These are the screws that are shorter with a sharp tip and you'll need to keep these in a safe location to reuse them in later steps. After the screws are removed, you can take the latch plate and the mechanism from the hole and put it aside.

Then you can begin to install the new latch. Place the latch plate in the door hole and secure it with the hardware provided. Make sure the square pin on the inside of the latch is facing the latching mechanism inside the handle and that it lines up with the other screw chambers in the door handle. Then push the exterior latch plate on and secure it using the screws provided.

Strike Plate

One of the most common reasons to replace a door handle is because it is loose or isn't locking properly. This is usually caused by misaligned parts in the latching system, such as a striking plate that's either too short or has moved upwards or down on the doorjamb as time passes. This project allows you to replace your old strikeplate with a more substantial one, which will provide better security for your upvc door handle repair and keep it shut.

To determine if the issue is caused by the strike plate, apply some lipstick or similar marking material to the latch bolt. Close the door, and then try to latch it. If the mark is located below the strike plate's hole, this indicates that your door isn't latching because the plate is too short. If the mark is higher than the strike hole on the plate, it's likely that the strike plate has been moved upwards or downwards on the doorjamb.

It is possible to screw the new strikeplate into the old one using the screws included with it, door handle repair plate depending on the Door Handle Repair Plate you have. It is possible that you will need to drill holes first and then chisel a bit of wood to ensure a tight fit. If this is the case, be careful not to cut too hard or you'll damage the integrity of your doorjamb.

You can also try installing a new strike plate, which provides the lock with a stronger hold on the repair upvc door handle and requires more force to open it. It usually requires two longer screws to fix the strike plate in the door frame. To accomplish this, you'll need to remove the existing strike plate, then drill and chisel out the wood to create space for the new one.

This difficult-to-find strike plate is made of solid brass and comes with a heavy-duty thickness. It's designed to be used on antique rim locks. This kit includes both wood screws and machine screws, so you can pick the right hardware to suit your needs. Be aware that wood screws have a pointed tip, while machine screws are more blunt.