• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. However when you have double glazed window repairs-pane windows that are anchored by internal beading, it will be more difficult to take out the old panes and put in new ones. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the fabric instead of landing on the floor, where they could be trodden under and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to block water and drafts from entering the home until a professional comes out and fix the window. This also serves as a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is significant, you may want to use security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. In time, they could develop a variety of issues that include sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll have to open the window to get to the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and verify the fit. If you're satisfied with the fit of your window, tighten the screws to hold them in place.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows are waterproof and safe from drafts.

UPVC handles can also loosen up. The majority of the time, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. The first step is to close the window and perform an initial test fit. The corner joints of the sash need to align with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is important to take action if you awake each day to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature in your home. Most often, upvc window repairs window leaks are caused by damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on the severity of the issue the caulking that was used up may require removal before a new layer is applied. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotten sills are also signs of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed window, it is more likely that the issue is with the seal rather than the frame. It is also possible to be repaired by an upvc window repair window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with ease It could be hinges at the fault. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical part, hinges can wear out over time. Changing a window hinge is essentially a very simple process but it can be easier if you have someone to help you hold the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused either by opening the window improperly or due to a poor installation in the factory. This issue can be fixed by sending us a photograph on our website. We will be pleased to offer you advice.

Regularly lubricating hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges may also become disaligned as a result of wear, causing gaps between the frame and sash. These can be easily fixed by giving them a good clean, but if they are beyond repair it could be necessary to have them realigned or replaced. The interlock may be disaligned. This is located on the hinge's side and may need to be cleaned. In some instances, it may be necessary to replace the hinges.

The next most common reason for draughts is window seals. These are prone to wear or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will lessen the possibility of draughts.

One of the most effective methods to reduce drafts is to use a draught excluder, these are usually fabric tubes which are filled with a sort of filler and can be placed on the top of your windowsill. They will keep your home warm by blocking cold air.

With a little maintenance and repairs your windows made of upvc will continue to provide excellent security and insulation for your home. However, it is important to recognise that all windows have a life span and eventually, they will reach the point when it's more efficient to replace them than fix them. So, if you're experiencing problems with your upvc windows, it is always recommended to seek help from a professional immediately.